Take the low voltage cable and put one wire in the hot terminal and one wire in the common terminal of the transformer.Because it will remain outdoors, he chose a covering made of stainless steel. Heath shows off the transformer that will power the landscape lights he’s installed. Step 4: Install the transformer at the receptacle Before securing the second side slip the shrink sleeves over the barrels, Make the connection with the brass barrel connectors with an allen key.Heath recommends a higher quality brass connector because the plastic ones that come free with the landscape wire are more susceptible to damage and corrosion.A low voltage cable is used as it is only 12v and if it accidentally gets cut, nobody will get hurt. Run a low voltage cable in the trench but do not bury.Steps for Installing Landscape Lighting: Step 1: Find your nearest power source He also installs a transformer so the homeowner can control when the lights power on and off. Heath uses a low voltage wire and decides to replace the plastic connectors with brass connectors to make the connections last longer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |